You are viewing documentation for Falco version: v0.27.0

Falco v0.27.0 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.

Falco Alerts

Falco can send alerts to one or more channels:

  • Standard Output
  • A file
  • Syslog
  • A spawned program
  • A HTTP[s] end point
  • A client via the gRPC API

The channels are configured via the falco configuration file falco.yaml. See the Falco Configuration page for more details. Here are details on each of those channels.

Standard Output

When configured to send alerts via standard output, a line is printed for each alert. Here's an example:

stdout_output:
  enabled: true
10:20:05.408091526: Warning Sensitive file opened for reading by non-trusted program (user=root command=cat /etc/shadow file=/etc/shadow)

Standard output is useful when using Fluentd or Logstash to capture logs from containers. Alerts can then be stored in Elasticsearch, and dashboards can be created to visualize the alerts. For more information, read this blog post.

When run in the background via the -d/--daemon command line option, standard output messages are discarded.

File Output

When configured to send alerts to a file, a message is written to the file for each alert. The format is very similar to the Standard Output format:

file_output:
  enabled: true
  keep_alive: false
  filename: ./events.txt

When keep_alive is false (the default), for each alert the file is opened for appending, the single alert is written, and the file is closed. The file is not rotated or truncated. If keep_alive is set to true, the file is opened before the first alert and kept open for all subsequent alerts. Output is buffered and will be flushed only on close. (This can be changed with --unbuffered).

If you'd like to use a program like logrotate to rotate the output file, an example logrotate config is available here.

As of Falco 0.10.0, falco will close and reopen its file output when signaled with SIGUSR1. The logrotate example above depends on it.

Syslog Output

When configured to send alerts to syslog, a syslog message is sent for each alert. The actual format depends on your syslog daemon, but here's an example:

syslog_output:
  enabled: true
Jun  7 10:20:05 ubuntu falco: Sensitive file opened for reading by non-trusted program (user=root command=cat /etc/shadow file=/etc/shadow)

Syslog messages are sent with a facility of LOG_USER. The rule's priority is used as the priority of the syslog message.

Program Output

When configured to send alerts to a program, Falco starts the program for each alert and writes its contents to the program's standard input. You can only configure a single program output (e.g. route alerts to a single program) at a time.

For example, given a falco.yaml configuration of:

program_output:
  enabled: true
  keep_alive: false
  program: mail -s "Falco Notification" someone@example.com

If the program cannot normally accept an input from standard input, xargs can be used to pass the falco events with an argument. For example :

program_output:
  enabled: true
  keep_alive: false
  program: "xargs -I {} aws --region ${region} sns publish --topic-arn ${falco_sns_arn} --message {}"

When keep_alive is false (the default), for each alert falco will run the program mail -s ... and write the alert to the program. The program is run via a shell, so it's possible to specify a command pipeline if you wish to add additional formatting.

If keep_alive is set to true, before the first alert falco will spawn the program and write the alert. The program pipe will be kept open for subsequent alerts. Output is buffered and will be flushed only on close. (This can be changed with --unbuffered).

Note: the program spawned by falco is in the same process group as falco and will receive all signals that falco receives. If you want to, say, ignore SIGTERM to allow for a clean shutdown in the face of buffered outputs, you must override the signal handler yourself.

As of Falco 0.10.0, falco will close and reopen its file output when signaled with SIGUSR1.

Program Output Example: Posting to a Slack Incoming Webhook

If you'd like to send falco notifications to a slack channel, here's the required configuration to massage the JSON output to a form required for the slack webhook endpoint:

# Whether to output events in json or text
json_output: true

program_output:
  enabled: true
  program: "jq '{text: .output}' | curl -d @- -X POST https://hooks.slack.com/services/XXX"

Program Output: Sending Alerts to Network Channel

If you'd like to send a stream of alerts over a network connection, here's an example:

# Whether to output events in json or text
json_output: true

program_output:
  enabled: true
  keep_alive: true
  program: "nc host.example.com 1234"

Note the use of keep_alive: true to keep the network connection persistent.

HTTP[s] Output: Send alerts to an HTTP[s] end point.

If you'd like to send alerts to an HTTP[s] endpoint, you can use the http_output option:

json_output: true
...
http_output:
  enabled: true
  url: http://some.url/some/path/

Currently only unencrypted HTTP endpoints or valid, secure HTTPs endpoints are supported (ie invalid or self signed certificates are not supported).

JSON Output

For all output channels, you can switch to JSON output either in the configuration file or on the command line. For each alert, falco will print a JSON object, on a single line, containing the following properties:

  • time: the time of the alert, in ISO8601 format.
  • rule: the rule that resulted in the alert.
  • priority: the priority of the rule that generated the alert.
  • output: the formatted output string for the alert.
  • output_fields: for each templated value in the output expression, the value of that field from the event that triggered the alert.

Here's an example:

{"output":"16:31:56.746609046: Error File below a known binary directory opened for writing (user=root command=touch /bin/hack file=/bin/hack)","priority":"Error","rule":"Write below binary dir","time":"2017-10-09T23:31:56.746609046Z", "output_fields": {"evt.t\
ime":1507591916746609046,"fd.name":"/bin/hack","proc.cmdline":"touch /bin/hack","user.name":"root"}}

Here's the same output, pretty-printed:

{
   "output" : "16:31:56.746609046: Error File below a known binary directory opened for writing (user=root command=touch /bin/hack file=/bin/hack)"
   "priority" : "Error",
   "rule" : "Write below binary dir",
   "time" : "2017-10-09T23:31:56.746609046Z",
   "output_fields" : {
      "user.name" : "root",
      "evt.time" : 1507591916746609046,
      "fd.name" : "/bin/hack",
      "proc.cmdline" : "touch /bin/hack"
   }
}

gRPC Output

If you'd like to send alerts to an external program connected via gRPC API (for example, the falco-exporter), you need to enable both the grpc and grpc_output options as described under the gRPC Configuration section.


Last modified January 29, 2021: chore: fix broken links (e5b101b)